⎝⎛叫我棋牌⎞⎠

您好,欢迎来到深圳市威悍防静电科技有限公司官方网站! Favorite Weihan | Feedback | Hello, Welcome to the official website of Shenzhen Weihan Antistatic Technology Co., Ltd.!

common problem

FAQ

Using an ion fan to clean the substrate sounds simple and obvious, but how do you use an ion fan to clean the substrate ..
The fabric of anti-static clothing is generally a synthetic fiber fabric embedded with conductive wire, although the fiber itself is difficult to be cleaned ..
The industry stipulates that the safety voltage is 36V and the safety current is 10mA. The degree of harm to the human body from electric shock depends mainly on passing people ..

contact details

FAQ

Shenzhen Weihan Antistatic Technology Co., Ltd.

Contact: Miss Yang

Phone: 86-0755-29981716

Mobile: 13580960057

Fax: 86-0755-29981710

Address: No.53, Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City

常见问题 Your present location: ⎝⎛叫我棋牌⎞⎠ - Common ProblemsCommon Problems

How to keep anti-static clothing clean

2014-09-17

Anti-static clothing is often used in biological engineering, pharmaceutical, research and development, semiconductor and other companies that require higher cleanliness. The production site of these companies requires a low dust content in the production environment.

The fabric of the anti-static clothing is generally a synthetic fiber fabric embedded with conductive wires. Although the fiber itself is a clean fiber that is difficult to stain, how to keep it is an important factor, that is, the method of cleaning. If ordinary washing methods are used, of course, they will also be soiled. So special methods must be used. Clean work clothes, from a management perspective, must also be cleaned and packed in a clean room when cleaning.

Under normal circumstances, clean work clothes are washed at least once a week, and some demanding jobs even wash once a day.

When cleaning in an ordinary room, dust and bacteria can adhere to it and become contaminated with cleaning agents. In addition, there is a danger of dust and microorganisms sticking during packing and handling.

The cleaning of antistatic clothing generally depends on professional cleaning companies for cleaning. The issues that should be paid attention to in the clean room cleaning process are as follows:

(1) The freshly sewn clean work clothes can be washed directly, and the clean work clothes that have been passed through are found to be oily and should be carefully removed before performing the washing procedure.

(2) Before washing, inspect the accessories such as scratches, damage and buckles, and repair, replace or scrap the defective ones.

(3) Washing, drying, and packing must be performed in a clean room with a higher degree of cleanliness than a clean room using work clothes.

(4) Water for wet and dry cleaning should be filtered. After the solvent is also distilled, a filter with a pore size of less than 0.2 μm is used at the point of use, and filtered more than once as needed.

(5) In order to remove water-soluble pollutants, after washing with water, the solvent is finally washed to remove oily pollutants.

(6) The temperature of wet washing water is as follows: polyester cloth 60-70C (up to 70C) nylon cloth 50-55C (up to 60C)

(7) Work clothes with buckles should be washed in the buckled state.

(8) Dry in a clean air circulation system dedicated to washing.

After drying, it can be stacked in a clean room for washing and packed in a clean polyester bag or bone bag. It can be double-packed or vacuum-sealed according to requirements. The packaging material should preferably be a material with good antistatic properties. Since the folding process is most prone to dust, the folding process must be performed in a high-level clean room.

Phone: 18487903773 Email: szweihan@qq.com
Address: No. 53 Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City, Guangdong ICP No. 15010061 [ Baidu Statistics ]
Copyright © 2003-2014 r-g-6899.com, All Rights Reserved BMAP GMAP

  • QQ交流
  • QQ交流
  • QQ交流
Wechat QR code
欢乐拼三张 真人游戏平台注册 多人牛牛 七乐彩